Using The Oven - hestan KDO Use And Care Manual

USING THE OVEN

SETTING COOKING MODE AND TEMPERATURE
For a description of available cooking modes, see "OVERVIEW OF COOKING MODES" on
page 10.
EN
The following modes can be selected by turning the cooking mode knob to the desired position.
To select Clean, the temperature knob must be moved into the Clean position too.
Observe the displayed temperature setting, and
adjust the temperature knob if needed. The
temperature can be changed by 5° F or 5° C steps.
As soon as one of the knobs is moved, the control
displays information for the corresponding cavity.
The corresponding message "UPPER" or "LOWER"
appears.
Cavity will begin to heat, "ON" is displayed when
the selected oven is active, oven lights will turn on.
"PREHEAT" message is displayed. Once the oven
has preheated, it will beep and switch the message
off.
To preheat the oven more quickly, touch the
(or
MENU/PRE
as well as PREHEAT.
To change the temperature while cooking, simply
turn the temperature knob until the display shows
the desired value.
Dual Cavity models: When you adjust any of
the knobs, the display will switch to the cavity
you adjusted. To view without adjusting, touch
UPPER/LOWER
cavities.
18
©2019 Hestan Commercial Corporation
OFF
COOKING MODE
SELECTOR
) key. The display will show FAST
to switch the display between
TEMP/PRESET
BROIL
TEMPERATURE
SELECTOR
COOK MODE SELECTOR
OFF
OFF
CONVECTION BAKE
CONVECTION BROIL
CONVECTION ROAST
PIZZA
PRE
BAKE
BROIL
LOW TEMP - DEHYDRATE
LOW TEMP - PROOF
LOW TEMP - DEFROST
LOW TEMP - WARMING
CLEAN
WARM/MIN
DISPLAY
VALUE
CONV BAKE
CONV BROIL
CONV ROAST
MULTI PIZZA
BAKE
BROIL
CONV DEHY
WARM
CONV
WARM PLUS