Adjust The Height And Slide The Dishwasher Into Place - Hisense HS693C60XAD User Manual

Adjust the height and slide the dishwasher into place

Freestanding
Make sure the area on which the dishwasher is to be installed is firm. Adjust the dishwasher's
height using the four feet so that the dishwasher is level. Also check that the dishwasher door can
be opened freely and is centred in the tub opening.
Built-in
1. Start by measuring the height from the floor to the bottom edge of the worktop.
2. Measure the height from the floor to the top edge of the dishwasher.
3. Adjust the dishwasher's feet by turning them clockwise to raise or anticlockwise to lower the
machine.
4. Check that there is an air gap of at least 3 mm between the underside of the worktop and the top
edge of the dishwasher.
5. Slide the dishwasher into place.
Pull the supply and drainage hoses and the power cable when sliding the dishwasher into
place.
Check that the drainage hose has no kinks or sharp bends. Also check that there is nothing
that can damage the hoses.
Check that the machine is installed such that the door opens freely, otherwise door lock
functionality may be disrupted.
6. Make any final adjustments to the front feet.
The dishwasher can also be installed in a recess without its worktop. See Remove dishwasher worktop.
24 mm
37