Table of Contents
Advertisement
Settings
1. Press
.
2. To open the dishwasher's settings menu, press and hold
3. Press
to step through the settings menu.
4. Press
to step through the alternatives.
5. Confirm the selected setting by pressing
6. To exit the menu, step through it or press
Open the dishwasher's settings menu
Select alternative
Settings
Automatic child lock
(CL)
Sounds
Rinse aid
Water hardness
Alternatives
1:00 (Off)
You can activate the Automatic child lock setting to prevent
1:01 (On)
children from starting the dishwasher.
To temporarily deactivate or activate the Automatic child
lock setting, press and hold
CL (Child Lock) will be shown on the display when pressing
the control panel. (To unlock, press and hold
seconds.)
2:00 - 2:03
A beep confirms that the control panel has been pressed.
(2:00 Off)
A beep indicates when a dishwashing program has ended.
Error messages are always indicated by a loud buzzer.
3:00 - 3:05
Setting for rinse aid dosage. The rinse aid dispenser can
(3:00 Off)
be adjusted between 3:00 (Off) and 3:05 (High dosage).
Increase the rinse aid dosage:
If the dishes have water marks.
Decrease the rinse aid dosage:
If the dishes have a sticky white/blue film.
If the dishes are streaked.
Build-up of foam. If you have very soft water, the rinse
aid can be diluted 50:50 with water.
Pre-selected at factory: 3:04
4:00 - 4:09
Adjusting the water softener. Select a setting depending
(4:00 Off)
on the hardness of the water supply. It is important that
this setting is correct!
and until SEt is shown on the display.
.
.
Confirm / Next setting
for three seconds.
for three
23
Advertisement
Table of Contents
