Table of Contents
Advertisement
Connection to hot water supply
Connect the dishwasher to the hot water supply (max. 70 °C) if the building is heated using an
energy-efficient means such as district heating, solar power or geothermal power. Choosing a hot
water connection reduces the dishwasher's energy consumption.
NOTE!
Do not exceed the permitted water supply temperature. Certain materials used in some cookware
cannot withstand high heat. See Fragile dishes in the chapter Loading the dishwasher.
Electrical connection
Information about the electrical connection can be found on the serial number plate. This specification
must match the electricity supply.
The dishwasher must be connected to an earthed socket.
The electric wall socket must be placed outside of the installation area to be easily accessible after
installing the dishwasher. Do not use an extension cord!
Fit the sound insulation
(only certain models)
Remove dishwasher worktop
Sound insulation
The dishwasher can be installed in a recess
without its worktop. If the dishwasher's worktop
is removed, the dishwasher must be installed
under a separate worktop.
39
Advertisement
Table of Contents
