Table of Contents
Advertisement
assembler, C-compiler and linker for FR whenever necessary (only the
changed files will be re-compiled).
If you wish to re-compile the entire project regardless of any changes,
you can use the BUILD-function. To check for syntax-errors on a specific
source-file, use the COMPILE/ASSEMBLE function.
These three functions are available on the button-bar or from the main
menu (Project – Compile / Make / Build / Abort).
Click on MAKE or BUILD. Messages from the individual language tools
will be fed into the output window at the bottom of the main screen. If the
tool chain (C-compiler à Assembler à Linker) was completed
successfully, the message "No Error" will appear.
If you get any errors during compilation, an appropriate message will be
generated. Try this with a simple syntax-error (e.g. delete a semicolon ";"
from the end of a C-line) and click on MAKE again. You will now see a
message like this :
Now Making...
main.c
*** c:\softune\sample\..\PrimDemo\src\main.c(43) E4062C: syntax error near `for'
------------------------------
Error detected.
------------------------------
To locate the position in the source-file, where the error occured, double-
click on the message. The editor will open the appropriate source-file,
indicating the error highlighted in red. Correct the error and re-compile
the project as explained above.
If more errors occurred, you can go through the error list step by step
using the menu "Edit – Top/Previous/Next/Bottom Error" or using the
appropriate buttons which have the same functions :
i
To get on-line help about a specific error, select the error message
and press F1. In many cases, you can get some useful hints how to
solve the problem. Of cource, you can also use the HELP-menu
anytime during development or debugging.
page -17-
Advertisement
Table of Contents
