SCHUNK TRIBOS Mini SVL Assembly And Operating Manual

TRIBOS Mini SVL
coolant-proof
Assembly and Operating Manual
1 General
1.1 Definition of terms
The term "product" replaces the product name on the first
page in this manual.
1.2 About this manual
This manual is part of the product and contains important
information for safe and correct use. It must be kept
accessible at all times. Personnel must have read and
understood this manual before starting any work. All safety
notes and the associated specifications in particular must be
observed and complied with. Illustrations may differ from the
actual design.
1.3 Applicable documents
– General terms of business
– Catalog data sheet of the purchased product
The other applicable documents can be downloaded from
schunk.com.
1.4 Warranty
The warranty is valid for 24 months from the date of delivery
from the production facility if the product is used as intended
and in compliance with the prescribed operating data.
Wear parts and parts that come in contact with the tool or
machine are not covered by the warranty.
1.5 Illustration of warnings
WARNING
Dangers for persons!
Non-observance can lead to irreversible injury and even
death.
CAUTION
Dangers for persons!
Non-observance can cause minor injuries.
NOTICE
Material damage!
Information about avoiding material damage.
1.6 Scope of delivery
– Product
– Assembly and Operating Manual
1.7 Accessories
The following accessories for the product are available
separately:
– Reduction insert SRE
– Polygon clamping device SVP-2, SVP-2D
– Polygon clamping device SVP-Mini, SVP-RM
– SVP-M storage rack
– Fixed scanner/hand scanner
2 Basic safety notes
2.1 Appropriate use
– The product is used to clamp rotationally symmetric tools
or workpieces.
– The product is intended for industrial use.
– The product is intended for installation in a machine/
automated system. The applicable guidelines for the
machine/automated system must be observed and
complied with.
– The product may only be used and operated within the
scope of the technical data and the specifications in this
manual, Chap. 3.
}
2.2 Inappropriate use
The product is not being used as intended if:
– The information in the technical data is not observed
when using and operating the product
– The maintenance and storage instructions are not
observed } Chap. 5.
– The product is used with heat shrinking technology.
2.3 Ambient conditions and operating
conditions
The ambient and operating conditions must correspond or be
adapted to the version of the product and the specifications
in the technical data.
2.4 Structural changes, spare parts
Structural changes such as modification and reworking, e.g.
additional threads, bore holes or attachments, may only be
carried out with the written approval of SCHUNK. Only use
original spare parts and spares authorized by SCHUNK.
2.5 Notes on safe operation
– Long, projecting or heavy tools may only be clamped if
the speed of rotation is reduced according to the ambient
and operating conditions on site. The level of reduction is
the responsibility of the operator and must ensure safe
operation of the product.
– Never combine multiple product extensions.
– Maintain and service the product on a regular basis.
– The operational safety and function of the product must
not be impaired by external influences.
– All repair work must be performed by SCHUNK.
– Follow the country-specific applicable safety, accident
prevention, and environmental protection regulations for
the application field of the product.
2.6 Personnel qualifications
– All operations may only be carried out by personnel that
are qualified and instructed for the respective operation.
– Personnel qualifications must comply with the on-site
country-specific requirements and laws.
2.7 Personal protective equipment
– When working on and with the product, follow the
respective country-specific legal requirements for
occupational health and safety, and wear the necessary
personal protective equipment.
– Follow country-specific accident prevention regulations
and the general safety notes.
2.8 Transport
To avoid product damage, the transport and handling of the
product must be adapted according to the version, weight
and packaging of the product. If necessary, use additional
aids.
3 Technical data
Operating temperature range [°C]:
Max. coolant pressure [bar]:
Pressure cycles max. coolant pressure:
Tool shank tolerance:
Min. tool shank hardness [HRC]:
Min. tool shank strength [N/mm
Max. speed of rotation [RPM] at L1=100:
Clamping Ø [mm]
3
4
5
6
* depending on the tool shank tolerance
The loading limits of the spindle must be observed.
Chap. 3.
}
D1 D2
clamp outer
Ø Ø
[mm] [mm]
3 9
3.175 9
4 9
5 9
6 9
NOTE: The product can be individually shortened from the
standard length of 100 mm to a minimum of 75 mm at
diameter D5; concentricity and imbalance may differ from the
standard length.
3.1 Permitted shank types
1. Shank type according to DIN 1835-1 form A and DIN 6535
form HA
– Tool shanks with diameters outside the tolerance h6
cannot be joined or no transmittable torque is
guaranteed.
– Tool shanks with projections/markings are difficult or
impossible to join.
NOTE: Observe the minimum hardness and minimum
strength of the tool shank
+20 ... +50
120
30000
h6
50
2
]: 1000
52000
Min. transmittable torque* [Nm]
1.5
2.5
3.5
4.5
D5 L1 L2 L3 max.
outer [mm] min. clamping clamping
Ø clamping depth
[mm] depth [mm]
[mm]
12 100 25 38.5
12 100 25 38.5
12 100 25 38
12 100 25 37
12 100 35 37.5
Chap. 3.
}
L8
length
[mm]
22.5
22.5
22.5
22.5
22.5