Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly STORAGE AND TRANSPORT General Instructions Transportation Wheels TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Maintenance and Inspection Calendar DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List...
Page 5
With Taurus® fitness equipment, the focus is on what sport is all about: maximum performance! Therefore, the equipment is developed in close consultation with athletes and sports scientists.
Page 6
ABOUT THIS MANUAL Please carefully read the entire manual before installation and first use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance.
Product weight (net, without packaging)approx.: 27 kg Maximum total load: 300 kg (user + weights) Taurus weight bench dimensions of cushion: Seat cushion: L 34 | W 29 | H 6 cm Back cushion: L 85 | W 29 | H 6 cm...
Personal Safety DANGER ⚠ Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly affected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year.
Set-Up Place WARNING ⚠ Do not place the equipment in main corridors or escape routes. ⚠ CAUTION Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. The training room should be well ventilated during training and not be exposed to any draughts.
ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries.
Scope of Delivery The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly. CAUTION ⚠...
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fit properly. Tighten the screws using the tool only when you are instructed to do so. Pre Assembly: Removal of Protective Parts After opening the packaging, remove the X and Y protective parts.
Page 14
Step 1: Assembly of the Main Frame and Front and Rear Bases Mount the front base (2) to the main frame (1) with four screws (21) and four washers (27). Mount the rear base (3) to the main frame (1) with four screws (21) and four washers (27). B900...
Page 15
Step 2: Assembly of the Seat Cushion Mount the seat cushion (12) to the seat frame (4) with three screws (22) and three washers (27).
Page 16
Step 3: Assembly of the Backrest Cushion Mount the backrest cushion (13) to the backrest frame (5) with four screws (22) and four washers (27). B900...
Page 17
Step 4: Assembly of the Handle Bar Mount the handle bar (9) to the main frame (1) with one screw (24), two washers (30) and one lock nut (33).
Page 18
Step 5: Arrangement of Nylon Caps Several nylon caps (35, 36 and 37) have already been pre-mounted. Attach two further nylon caps (36) to the screw (24) and lock nut (33) which were mounted earlier in step 4. (35) 2 × (36) 4 ×...
STORAGE AND TRANSPORT General Instructions ⚠ WARNING The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ࣑...
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. CAUTION ⚠ Damaged or worn components may affect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner.
Maintenance and Inspection Calendar To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specified intervals: Part Weekly Monthly Quarterly Screw connections Cushions Legend: C = clean;...
RECOMMENDED ACCESSORIES To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. For training equipment like smith machines, weight benches or racks this could for example be a floor mat, which makes your fitness equipment stand more securely and also protects the floor from sweat but it could be also additional weights, handles, foot straps for leg exercises or triceps ropes.
The serial number of your equipment is unique. It's located on a white sticker. The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate field. Serial number: Brand / Category: Taurus / weight bench Model Name: B900 SKU: SEBR2580...
Parts List Name Qty. MAIN FRAME FRONT BASE REAR BASE SEAT FRAME BACKREST FRAME INCLINE ADJUSTMENT FRAME FOR SEAT CUSHION INCLINE ADJUSTMENT FRAME FOR BACKREST CUSHION FIXATION HANDLE BAR SUPPORTING AXLE SPRING SEAT CUSHION BACKREST CUSHION BUSHING FOOT CAP, LEFT SIDE FOOT CAP, RIGHT SIDE WHEEL SQUARE CAP 25*25...
Page 25
LOCK NUT M10 LOCK NUT M12 NYLON CAP M8 NYLON CAP M10 NYLON CAP M12...
WARRANTY Training equipment from Taurus® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline.
Page 28
Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.
CONTACT TECHNIK TEKNIK OG SERVICE TECHNIQUE & SERVICE +49 4621 4210-900 80 90 16 50 +33 (0) 189 530984 +49 4621 4210-945 +49 4621 42 10 933 +49 4621 4210-698 info@fitshop.dk info@fitshop.fr technik@sport-tiedje.de ...
Page 30
LIVE FITNESS WEBSHOP AND SOCIAL MEDIA The Sport-Tiedje Group is Europe’s largest http://www.powerhouse-fitness.co.uk/ specialist for home fitness equipment with www.powerhouse-fitness.co.uk/blog/ currently 70 stores and one of the world’s most renowned online mail order companies for fitness equipment. https://www.facebook.com/powerhousefitness.co.uk Powerhouse Fitness is part of the Sport-Tiedje Group.