Purpose And Content Of The Manual; Target Group; Storing The Use And Maintenance Manual; On Delivery Of The Appliance - Ice SCRUB 50 Use And Maintenance Manual

Table of Contents

The aim of this manual is to provide customers with all the information needed to use the appliance in the safest, most appropriate and most

autonomous way. It includes information concerning technical aspects, safety, operation, appliance downtime, maintenance, spare parts and

scrapping. Operators and qualified technicians must read the instructions in this manual carefully before carrying out any operation on the

appliance. If in doubt about the correct interpretation of instructions, contact your nearest Customer Service Centre to obtain the necessary

clarifications.

This manual is aimed at operators and qualified technicians responsible for appliance maintenance. Operators must not perform operations

that should be carried out by qualified technicians. The manufacturer is not liable for damages resulting from failure to comply with this veto.

The Use and Maintenance Manual must be stored in its special pouch close to the appliance, protected from liquids and anything else that

could compromise its legibility.

When the machine is delivered to the customer, an immediate check must be performed to ensure all the material mentioned in the shipping

documents has been received, in addition to verifying that the equipment has not been damaged during transportation. If this is the case, the

carrier must ascertain the extent of the damage at once, informing our customer service office. It is only by prompt action of this type that the

missing material can be obtained, and compensation for damage successfully claimed.

Any type of equipment can only work properly and effectively if used correctly and kept in full working order by performing the maintenance

operations described in the attached documentation. You should therefore read this instruction manual carefully, consulting it again if issues

arise while using the machine. If necessary, remember that our assistance service (organised in collaboration with our dealers) is always

available for advice or direct intervention.

For technical assistance or to request replacement parts, always give the model, the version and the serial number (written on the relevant

plate).

SCRUB 50 and SCRUB 55 - 65 are scrubbing machines that are able to clean a wide range of flooring and dirt types by means of the

mechanical action of one or more cylindrical brushes and the chemical action of a water-detergent solution. As it advances, it also collects the

dirt removed and the detergent solution not absorbed by the floor. The appliance must only be used for this purpose.

This scrubbing machine was designed and built for the cleaning (scrubbing and drying) of smooth, compact flooring in the commercial,

residential and industrial sectors by a qualified operator in proven safety conditions. The scrubbing machine is not suitable for cleaning rugs

or carpets. The appliance is only suitable for use in indoor - or at least covered - areas.

ATTENTION: the appliance is not suitable for use in the rain, or under jets of water.

IT IS FORBIDDEN to use the appliance for picking up dangerous dusts or inflammable liquids in places with an explosive atmosphere.

In addition, it is not suitable as a means of transport for people or objects.

Operator cooperation is paramount for accident prevention. No accident prevention programme can be effective without the full co-operation

of the operator who is directly responsible for machine operation. The majority of occupational accidents that happen both in the workplace or

whilst moving are caused by failure to respect the most basic safety rules. An attentive, careful operator is most effective guarantee against

accidents and is fundamental in order to implement any prevention programme.