ABB Fimer PVI-10.0/12.5-TL-OUTD Product Manual page 78

4. New PW
This section of the menu allows you to change the settings menu pas-
sword (default 0000).
We advise you to memorize the new password with great care.
If the Password is lost you will not have access to the inverter, since there is no Reset function
for security reasons
5. Cash
This section of the menu allows you to set the name of the currency
and the value of 1 kWh of energy produced. Setting these parameters
correctly allows the actual earnings/savings achieved by the system to
be displayed.
• Name: sets the desired currency (default is EUR)
• Val/KWh: indicates the cost/incentive for 1 kWh in the chosen currency
(default is 0.50).
6. Time
Allows you to set the current date and time (not counting summer time)
7. Language
Allows you to set the language you prefer for the menus
8. Vstart
This section of the menu allows you to set the Vstart voltage (for the
two channels separately if they are configured independently) to suit the
system requirements.
We advise changing the activation voltage only if really necessary and to set it to the correct
value: the photovoltaic generator sizing tool available on the FIMER website will indicate
whether Vstart needs changing and what value to set it at.
9. Autotest
This section of the menu is available only for the Italian country standard.
Refer to the section on this topic in the manual.
7 - Operation
78