ABB Fimer PVI-10.0/12.5-TL-OUTD Product Manual page 15

ABB
PVI-XX.X-TL-OUTD-Y
The officially required information is located on the approval label. The identification label
is an accessory label which shows the information necessary for the identification and cha-
racterisation of the inverter by FIMER.
N.B. The labels must NOT be hidden with objects and extraneous parts (rags, boxes, equip-
ment, etc.); they must be cleaned regularly and kept visible at all times.
In addition to the label showing the specifications of the inverter, there
are two part identification labels for the inverter and wiring box.
These labels list the following information:
P/N:PPPPPPPPPPP
SN:YYWWSSSSSS WK:WWYY
WO:XXXXXXX
SO:SXXXXXXXX Q1
• Inverter model
- XX.X = Inverter power rating:
- Y = Integrated disconnect switch / Input fu-
ses board with Integrated disconnect switch
• Inverter Part Number
• Inverter Serial Number composed of:
- YY = Year of manufacture
- WW = Week of manufacture
- SSSSSS = sequential number
• Week/Year of manufacture
2 - Characteristics
15