Setting Up The Monitor; Attaching The Stand - Dell UltraSharp 27 User Manual

Setting up the monitor

Attaching the stand

NOTE: The stand is not installed at the factory when shipped.
NOTE: The following instructions are applicable only for the stand that was
shipped with your monitor. If you are attaching a stand that you purchased
from any other source, follow the set up instructions that were included
with the stand.
To attach the monitor stand:
1. Open the front flap of the box to get the stand riser and stand base.
2. Align and place the stand riser on the stand base.
3. Open the screw handle at the bottom of the stand base and turn it clockwise to
secure the stand assembly.
30 | Setting up the monitor