Audio Input; Audio Output; Other Input/Output - Panasonic AG-X2 Operating Instructions Manual

Specification – Specifications

Audio input

Built-in microphone
Stereo microphone
<AUDIO INPUT1>/<AUDIO INPUT2> terminal
XLR (3-pin) ×2
Input high impedance,
<LINE> / <MIC> / <i48V> (Switched with <INPUT 1> / <INPUT 2> switch)
•
<LINE>: 4 dBu, 0 dBu (switched with menu)
•
<MIC>: −40 dBu, −50 dBu, −60 dBu (switched with menu)

Audio output

<SDI OUT> terminal
LPCM 2ch
<HDMI> terminal
LPCM 2ch
Headphone terminal
3.5 mm diameter stereo mini jack × 1
Speaker
20 mm diameter, round ×1

Other input/output

<TC IN/OUT> terminal
•
BNC terminal ×1
Used as the input and output terminals (switched with menu)
•
Input: 1.0 V to 4.0 V [p-p], 10 kΩ
•
Output: 2.0 V±0.5 V [p-p], low impedance
<REMOTE> terminal
2.5 mm diameter super mini jack × 1
Remote control terminal of serial communication
Analogue remote control used for previous Panasonic models cannot be used.
USB terminal
®
USB Type-C ×1, USB3.1 Gen1, Host/device combined (switched with menu)
Device: USB mass storage functionality (read only)
Host: Supports bus power (5 V, 0.9 A)
USB tethering functionality
USB ethernet adaptor functionality
<LAN> terminal
RJ-45×1: 1000BASE-T / 100BASE-TX
<DC IN 12V> terminal
DC12 V, EIAJ type 4
311