Panasonic AG-X2 Operating Instructions Manual page 257

Screen status display – Mode check display
[V-Log/709]
(When [SCENE FILE] menu
[GAMMA MODE SEL] is set
to [V-Log])
[CARD STATUS]
[SDI OUT]
[HDMI OUT]
[LCD/VF]
—
[TOTAL]
[SLOT1]
[SLOT2]
Images output from the <SDI OUT> terminal are displayed with [V-Log]/
[V-709].
•
Displays with [V-709] in the following case:
– When [VIDEO OUT/LCD/VF] menu
V-Log] is set to anything other than [V-Log]
•
Displays with [---] in the following case:
– When the [VIDEO OUT/LCD/VF] menu
HDMI output
Images output from the <HDMI> terminal are displayed with [V-Log]/[V-709].
•
Displays with [V-709] in the following case:
– When [VIDEO OUT/LCD/VF] menu
V-Log] is set to anything other than [V-Log]
•
Displays with [---] in the following case:
– When the [VIDEO OUT/LCD/VF] menu
SDI output
Images output from the LCD monitor and viewfinder are displayed with
[V-Log]/[V-709].
Displays the status, remaining recording capacity, and the total capacity of
the memory card inserted in the card slot.
The status of the memory card that is displayed are following types.
[NO CARD]:
Memory card is not inserted.
[UNSUPPORTED]:
Memory card is not supported.
[FORMAT ERROR]:
Memory card cannot be used. (Format error)
[PROTECTED]:
It is write protected. (The write-protection switch of the memory card is set to
the LOCK side)
[NO REMAIN]:
There is no remaining recording capacity.
[NOT SDXC]:
SDXC memory card is not inserted in the MOV recording/MP4 recording.
Cases other than above:
The remaining recording capacity is displayed in 0 % through 100 %.
Displays the remaining recording capacity/total capacity of the memory cards
in the card slot 1 and the card slot 2.
Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 1.
Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 2.
257
[SDI SETTING] [SDI OUT
[VIDEO OUT SEL] setting is
[HDMI SETTING] [HDMI OUT
[VIDEO OUT SEL] setting is