[Recording] Menu - Panasonic AG-X2 Operating Instructions Manual

Menu – [RECORDING] menu

[RECORDING] menu

Sets the various items in the recording function.
[FORMAT MEDIA]
Formats the memory card in the specified card slot.
All data will be deleted when the card is formatted. Save any important data to a computer, etc. (
in card reader mode: 263)
The items that can be selected are as follows.
≥[SLOT1], [SLOT2]
[CLIP NAME]
[CAM INDEX]
Sets the CAM INDEX used for recorded MOV format/MP4 format file names.
Set one upper case alphabetical character. This is used as a value to be stored in the volume label of the memory card.
The items that can be set are as follows.
≥[A]...[Z]
(Factory setting: [A])
[NEXT CARD COUNT]
Sets the CARD COUNT used for recorded MOV format/MP4 format file names.
In the following cases, the setting value in [NEXT CARD COUNT] is stored in the volume label of the memory card together with
the [CAM INDEX] setting value as CARD COUNT. Furthermore, after storing, the setting value increases by 1. ([001] returns
after [999])
•
When formatted the memory card
•
When recorded to the memory card where CARD COUNT is not stored in the volume label
The items that can be set are as follows.
≥[001]...[999]
(Factory setting: [001])
[2 SLOTS FUNC.]
Sets the recording function that uses 2 memory cards.
[OFF]
[RELAY REC]
[SIMUL REC]
[BACKGR REC]
[DUAL CODEC REC]
(Factory setting: [RELAY REC])
[DUAL CODEC SETTING]
When dual codec recording, this sets the clip recorded on the sub recording side.
[FHD 50Mbps]
[FHD 8Mbps]
(Factory setting: [FHD 50Mbps])
•
In the following cases, this cannot be set.
– When the [SYSTEM] menu
– When the [SYSTEM] menu
regarding [REC FORMAT] and [DUAL CODEC SETTING] which can be set with dual codec recording:
Does not set.
Sets to the relay recording. (
Sets to the simultaneous recording. (
Sets to the background recording. (
Sets to the dual codec recording. (
Performs recording at a bit rate of 50 Mbps.
Performs recording at a bit rate of 8 Mbps.
[FILE FORMAT] is set to anything other than [MOV]
[REC FORMAT] is set to a setting that does not support dual codec recording. (
109
Connection with a computer
Relay recording: 196)
Simultaneous recording:
Background recording: 198)
Dual codec recording [X2]:
197)
200)
Note
201)