Using the zoom function – Adjusting the zoom position
Using i.ZOOM
When [i.ZOOM] is set to [ON], you can zoom to a maximum of approximately 32× (approximately 24× when recording with UHD)
while maintaining the beauty of high-definition image quality.
1
Select the [CAMERA] menu
•
You can set [i.ZOOM] in a USER button so that you can use iZoom. (
•
The zoom ratio display changes.
(For example)
– iZ00 to iZ99: Optical zoom range
–
Z99: In iZoom
Using fast zoom
When [FAST ZOOM] is assigned to a USER button, you can use fast zoom by operating the zoom lever (on the grip).
1
Select the [CAMERA] menu
2
Either press the USER button assigned to [FAST ZOOM] or touch the USER button
icon.
3
Push the zoom lever (on the grip) until the end to zoom.
•
The zoom ratio display changes during fast zoom. (For example:
•
When the [CAMERA] menu
zoom lever (on the handle).
•
As the operating noise of fast zoom will be louder than normal, the operating noise may be recorded during recording. If the
operating noise is a problem, disable [FAST ZOOM].
•
Auto focus may not be able to keep up during fast zoom, depending on the subject.
•
Fast zoom cannot be used in the following case:
– When interval recording is enabled
[SW MODE]
[USER SW]
[SW MODE]
[H.ZOOM SPEED] is set to [7], fast zoom can also be used by operating the
[i.ZOOM]
[ON].
Assigning functions to the USER buttons:
[USER1] to [USER14]
99)
170
65)
[FAST ZOOM].