Panasonic AG-X2 Operating Instructions Manual page 294

Memory card camera recorder
Table of Contents

Advertisement

Notes – Warning system
Alert
Screen display
Camera image screen
[SIMUL REC WARNING <SLOT 1>]/
[SIMUL REC WARNING <SLOT 2>]
[BACKGROUND REC WARNING
<SLOT 1>]/
[BACKGROUND REC WARNING
<SLOT 2>]
[DUAL CODEC REC WARNING
*1
<SLOT 2>]
[REINSERT OR CHECK CARD
<SLOT 1>]/
[REINSERT OR CHECK CARD
<SLOT 2>]
[FORMAT ERROR CARD <SLOT 1>]/
[FORMAT ERROR CARD <SLOT 2>]
[NOT SDXC CARD <SLOT 1>]/
[NOT SDXC CARD <SLOT 2>]
[INCOMPATIBLE CARD <SLOT 1>]/
[INCOMPATIBLE CARD <SLOT 2>]
[BACKUP BATT EMPTY]
Description
An error has occurred in one of the
memory cards during simultaneous
recording.
Recording has been attempted while
the number of clips has exceeded the
limit on one of the memory cards
during simultaneous recording.
An error has occurred in one of the
memory cards during background
recording.
Recording has been attempted while
the number of clips has exceeded the
limit on one of the memory cards
during background recording.
An error occurred with the memory
card on the sub recording side during
dual codec recording.
During dual codec recording, you are
trying to record when the number of
clips for the memory card on the sub
recording side exceeds the upper
limit.
The memory card cannot be
recognized properly because a
recording medium which is not
supported has been inserted or there
is dirt on the terminal of the memory
card.
A memory card with management
information out of specifications has
been inserted.
(Include when the system frequency
(59.94 Hz system or 50.00 Hz system)
for the AVCHD format of the memory
card is different from the setting in the
[SYSTEM] menu
[FREQUENCY])
When [FILE FORMAT] is set to MOV
format/MP4 format, there is a memory
card inserted to which MOV format/
MP4 format data cannot be recorded.
A memory card that may not be able
to record due to slow writing speed
has been inserted.
Voltage lowering of the backup battery
for internal clock was detected when
turning on the power.
294
Behavior and cause
Recording to the other memory card will continue.
Recording to the other memory card will continue.
[SIMUL REC WARNING <SLOT 1>] [<OVER MAX NUM.
OF CLIPS>]/[SIMUL REC WARNING <SLOT 2>] [<OVER
MAX NUM. OF CLIPS>] is displayed in the warning display
field of the STATUS screen for the mode check.
Replace the memory card or delete unnecessary clips.
Recording to the other memory card will continue.
Recording to the other memory card will continue.
[BACKGROUND REC WARNING <SLOT 1>] [<OVER
MAX NUM. OF CLIPS>]/[BACKGROUND REC WARNING
<SLOT 2>] [<OVER MAX NUM. OF CLIPS>] is displayed
in the warning display field of the STATUS screen for the
mode check.
Replace the memory card or delete unnecessary clips.
Recording continues on the memory card on the main
recording side.
Recording continues on the memory card on the main
recording side.
[DUAL CODEC REC WARNING <SLOT 2>] [<OVER MAX
NUM. OF CLIPS>] is displayed in the warning display field
of the STATUS screen for the mode check.
Replace the memory card or delete unnecessary clips.
Check the memory card that is inserted.
Insert the memory card again if displayed when inserting a
memory card.
Insert a memory card that can record.
The system frequency information for the AVCHD format is
confirmed at the time of formatting or at the first recording.
Insert a SDXC memory card.
The current operation will continue.
Use a memory card with sufficient writing speed.
The current operation will continue.
Set the date/time again after charging the built-in battery.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-x20

Table of Contents