National Instruments NI PXIe-8130 User Manual page 51

Note
The Ethernet controller can perform an automatic crossover, thus eliminating the
need for crossover cables.
LED Color
Top Green
(None)
Bottom
Green
Amber
© National Instruments Corporation
Table 3-5. 10/100/1000 LAN Connector LED States
LED State
Off
On (steady state)
On (brighter and pulsing)
Off
On
On
Condition
LAN link is not established.
LAN link is established.
The controller is communicating with another
computer on the LAN.
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
1000 Mbit/sec data rate is selected.
3-7
Chapter 3 I/O Information
NI PXIe-8130 User Manual