Introduction - Siemens SIMATIC ET 200SP Equipment Manual

Introduction

Purpose of the documentation
This manual supplements the ET 200SP distributed I/O system
(https://support.automation.siemens.com/WW/view/en/58649293) system manual as well as
the function manuals. This manual contains a description of the module-specific information.
The system-related functions are described in the system manual. All system-spanning
functions are described in the function manuals.
The information provided in this equipment manual and the system manual allows you to
commission the CPU.
Conventions
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software "STEP 7 (TIA Portal)".
Please also observe the notes marked as follows:
NOTE
A note contains important information on the product described in the documentation, on
the handling of the product or on the section of the documentation to which particular
attention should be paid.
Recycling and disposal
For environmentally friendly recycling and disposal of your old equipment, contact a certified
electronic waste disposal company and dispose of the equipment according to the applicable
regulations in your country.
Industry Mall
The Industry Mall is the catalog and order system of Siemens AG for automation and drive
solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power
(TIP).
You can find catalogs for all automation and drive products on the Internet
(https://mall.industry.siemens.com).
CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
1
5