Technical Specifications - Siemens SIMATIC ET 200SP Equipment Manual

Technical specifications

The following table shows the technical specifications as of 11/2022. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7512-1DM03-0AB0/td?dl=en).
Article number
Product function
Engineering with
Mains buffering
28
General information
Product type designation
HW functional status
Firmware version
• I&M data
Module swapping during operation (hot
•
swapping)
• Isochronous mode
• STEP 7 TIA Portal configurable/integrated
from version
Configuration control
via dataset
Control elements
Mode selector switch
Supply voltage
Rated value (DC)
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
• Mains/voltage failure stored energy time
Input current
Current consumption (rated value)
Current consumption, max.
Inrush current, max.
I²t
Power
Infeed power to the backplane bus
Power loss
Power loss, typ.
Memory
6ES7512-1DM03-0AB0
CPU 1512SP-1 PN
FS01
V3.0
Yes; I&M0 to I&M3
Yes; Multi-hot swapping
Yes; only with PROFINET; with minimum OB 6x
cycle of 500 µs
V18 (FW V3.0); with older TIA Portal versions con­
figurable as 6ES7512-1DK01-0AB0
Yes
1
24 V
19.2 V
28.8 V
Yes
10 ms
0.51 A
0.7 A
1.34 A; Rated value
0.3 A²·s
8.05 W
6.5 W
CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
6