Checking And Lubricating The Centerstand And Sidestand; Checking The Front Fork - Yamaha X-MAX 400 ABS 2018 Owner's Manual

Periodic maintenance and adjustment
Checking and lubricating the
centerstand and sidestand
1. Sidestand
ZAUM1033
1. Centerstand
The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-to-
metal contact surfaces should be lubri-
cated if necessary.
WARNING
If the centerstand or sidestand does
not move up and down smoothly,
have a Yamaha dealer check or re-
pair it. Otherwise, the centerstand or
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
Recommended lubricant:
Lithium-soap-based grease
EAU23215

Checking the front fork

The condition and operation of the
front fork must be checked as follows
at the intervals specified in the periodic
maintenance and lubrication chart.
To check the condition
Check the inner tubes for scratches,
damage and excessive oil leakage.
To check the operation
1. Place the vehicle on a level sur-
2. While applying the front brake,
1
EWA10742
NOTICE
If any damage is found or the front
fork does not operate smoothly,
have a Yamaha dealer check or re-
pair it.
7-27
face and hold it in an upright posi-
tion. WARNING! To avoid injury,
securely support the vehicle so
there is no danger of it falling
over.
[EWA10752]
push down hard on the handle-
bars several times to check if the
front fork compresses and re-
bounds smoothly.
EAU23273
7
ECA10591