Configuring Your Phone - Yealink SIP-T54W Quick Start Manual

Configuring Your Phone

Configuring via web user interface
Accessing the web user interface:
OK
1. Press to obtain the IP address of the phone.
2. Open a web browser on your computer, enter the IP address into the address bar (fox example,
"http://192.168.0.10" or "192.168.0.10") .
3. In the Login page, type the user name (default: admin) and password (default: admin) and click
Configuring Network Settings
DHCP
: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network set-
tings, for example, IP address, subnet mask, gateway address and DNS address.
Static IP
: If your phone cannot contact a DHCP server for any reason, you need to configure them manually.
Note: The phone also supports IPv6, but IPv6 is disabled by default. Wrong network settings may result in the
inaccessibility of your phone and may have an impact on the network performance. Contact your system admin-
istrator for more information.
Configuring Account Settings
Parameters of the account:
Register Status:
Line Active:
Label:
Display Name:
User Name:
Register Name:
Password:
Server Host:
Register status icons on the LCD screen:
(Green) Registered
Note: Check with your system administrator if any error appears during the registration process or a specific con-
figuration is required for your registration.
Configuring via phone user interface
Configuring Network Settings:
Menu
Navigate to ->
Configuring Account Settings:
Menu
Navigate to ->
Note: For more information on account parameters, refer to
3
Network
: Click
Account
: Click
It shows the register status of the current account.
It enables or disables the account.
It is shown on the LCD screen to identify the account.
It is shown as caller ID when placing a call.
It is provided by ITSP (required).
It is provided by ITSP (required).
It is provided by ITSP (required).
It is provided by ITSP (required).
Advanced
(default password: admin)->
Advanced
(default password: admin)->
Basic IPv4 Config
-> ->
Register Account X
-> ->
(Yellow) Registering
Network
Accounts
Configuring via web user interface
(X=1, 2, 3...15, 16)
(Gray) Register Failed
WAN Port IPv4
-> -> .
.
Login
.
above.