Figure 3.17 Setting The Jumpers Of The Gplimt - Samsung OfficeServ 7200 Installation Manual

Hide thumbs Also See for OfficeServ 7200:

Table of Contents

CHAPTER 3. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь

отображаться.

3.3.1.5 GPLIMT

GPLIMT (Gigabit PoE LAN Interface Module TX) is a board which sends/receives the

data from the intranet, and provides 12 ports of 10/100 BASE-T interface and 2 ports of 1000

BASE-TX/SX/LX. The GPLIMT only operates as a simple switching for the hub.

Jumper Setting



When using the internal rectifier: Connect the shunt pins (J2, J3, J4) to pins 1 and 2.



When using an external rectifier: Connect the shunt pins (J2, J3, J4) to pins 2 and 3.

Set jumpers J1~J4 in the GPLIMT.

3-20

Figure 3.17 Setting the jumpers of the GPLIMT

Table of Contents