Figure 7.24 Connecting Installation Tool - Samsung OfficeServ 7200 Installation Manual

CHAPTER 7. Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь
отображаться.
7.2.4.1 Connecting a PC for Programming Using a LAN Port
You can connect a PC where the Installation Tool is installed to the OfficeServ 7200 using
a LAN port. The Installation Tool allows you to manage the OfficeServ 7200 remotely.
This section describes how to connect a PC for programming to the OfficeServ 7200 and
how to configure the software to use that PC.
If a LAN is configured in your company, connect it to the LAN port of the MP20/MP20S
and the PC for programming to it. If no LAN is configured in your company, connect the
PC for programming to the LAN port of the LIM/PLIM/PLIM2.
Below are the steps for connecting a PC for programming to the system.
1) Configure the network parameters using the MMC 830 program.
2) Configure the Installation Tool parameters.
Below is the description of each of the steps mentioned above.
7-20
MP20/MP20S
OfficeServ 7200
LIM
MP20/MP20S
OfficeServ 7200

Figure 7.24 Connecting Installation Tool

LAN
Installation Tool
or
Installation Tool
© SAMSUNG Electronics Co., Ltd.