Hyundai WR6022-1800Q Use And Maintenance Manual page 27

DANGER!
The cylinders may cause injuries!
Prior to replacement, disconnect the machine from the power grid and wait for the cylinder to
come to a stop. When replacing, wear work gloves.
1. Screw out bolt 1 on the underside of the chassis (Fig.8)
Lift the cylinder 3 at an angle and pull it out (Fig.9)
Slide the second cylinder on to the drive shaft so that the pin fits to the respective part of drive
shaft. Tighten the screw to secure again.
Fig.8
ENGLISH
27
Fig.9