Installation of the completely assembled collection basket on to the machine (fig.7)
A. Lift up the protective cover 11.
B. Make sure that the ejection chute is
Clear and free of debris.
C. Place the fully assembled collection
Basket on to the fastening points in
the rear part of the chassis, as shown.
D. Place the protective cover 11 on top
of the collection basket. Check that
the collection basket is seated cor-
rectly.
NOTE: For use without the grass catcher, the machine may be used
without the collection basket with the protective cover (11) in the
lower position.
Replacing blades (out product do not include the blades, just including
the sweeper, the replacing method between blade and sweeper is
same)
Sweeper photo is as below:
ENGLISH
26