Hyundai WR6022-1800Q Use And Maintenance Manual page 25

8. Working depth adjustment control 18. Handle screw washer
9. Basket
ASSEMBLING THE MACHINE
Attach the handle's bottom parts (Fig.2 Point 7)
Using the screw (Point 14). Adjust the required
Handle height using the XZN spline (Point 17).
Screw on the handle's middle part with the
Power cord saefty clamp attached using the
Fast coupling lever and the handle screw (Fig.3)
Screw on the handle's top part (fig.4)
Attach the power cord to the handling using the plastic clips (Fig.5)
Place the steel frame 10 into the textile col-
lection basket 9 and attach all fastener to
the left, right and rear poles of the frame.
Make sure that all fasteners are secured cor-
rectly (Fig.6)
ENGLISH
25