Advertisement
Wiring diagram
Load capacity
8 A/250 V (AC-1)
Pairing
①
②
Correct pairing will be confirmed by temporary switching off of the output
③
circuit and the LED will turn on again.
S1 - control input triggered with level L
L - power supply L
N - power supply N
N - internally connected
NO - output - NO contact
COM - output - NO contact
Control input does not cooperate
with backlighted buttons.
The actual maximum load depends on the natu-
re and design of the receiver.
For more information visit: www.fif.com.pl.
After the device is properly connected, press and
hold the PROG button until the relay will switch on
and the communication LED will go off.
Press the selected button on a remote control or in
a flush-mounted transmitter.
- 3 -
or N
Advertisement
