Water Line - Sub-Zero DEU1550B/L Installation Manual

Installation
Alignment
ANCHORING
CAUTION
If using a power drill to predrill holes or install
screws, verify the drill chuck does not contact the
units face frame.
Adjust the depth of the unit to fit flush with the surround-
ing cabinetry. Allow for panel thickness. Once aligned,
verify the door opens properly, then install a #8 x 1/2" flat-
decorative head screw in each bracket.
WARNING
To avoid a hazard due to instability of the appliance,
it must be fixed in accordance with the instructions.
Anchoring

Water Line

MODEL DEU2450CI
Under the unit, 1/4" plastic tubing is connected to the unit
with a preassembled 1/4" compression connection. The
water line fitting connection kit, provided with the unit,
contains a 1/4" compression union fitting for connection to
the household water line.
Purge the water line prior to final connection to the unit.
This will remove any debris that may be present in the
tubing from installing the new water line. Connect the
plastic tubing from the unit to the house water supply line
with the fitting connection kit provided. Refer to the
illustration below. Check all water line fittings for leaks.
IMPORTANT NOTE: Water lines cannot be exposed to
freezing temperatures.
WARNING
Connect to potable water supply only.
WATER LINE
CONNECTION
Water line connection
subzero.com | 9