Gree GWH09YCXB-K6DNA1C Service Manual page 57

function
function is for limiting power of the whole unit. Press "Mode"
and "Sleep" buttons simultaneously, the remote controller will
circularly display as the following:
● Maximum power limited under the
mode.
● If you want to cancel the power limiting function, press "Mode"
and "Sleep" buttons simultaneously till the icon in remote
controller is not displayed.
● When the remote controller is turned off, power limiting function
is cancelled. If you want to activate the function, please repress
"Mode" and "Sleep" buttons simultaneously.
● If the current power is lower than the maximum power of
mode, then the power will not be limited after entering into such
mode.
● For the model with one outdoor unit and two indoor units, if any
one of indoor units enters into power limiting function, the outdoor
unit will enter into the set limiting power mode of indoor unit; when
two indoor units enter into power limiting mode, then the power of
outdoor unit will be limited according to the lower power of the two
indoor units.
NOTE:
● This button is only available for the model with such function.
Indoor ambient temperature
By holding " On/Off " and "
see indoor ambient temperature or indoor ambient humidity on
indoor unit's display. The setting on remote controlleris selected
circularly as below:
● When selecting "
indicator on indoor unit displays indoor ambient temperature.
Clean reminder function of filter
The reminder function is defaulted to be OFF. Hold " On/Off " and
" " buttons simultaneously for 5s to turn it on. The buzzer will
give out sound for 0.5s and the dual-8 nixie tube on the display
will be on for 3s; Once the reminder function is turned on, when
the air conditioner has reached to the set time, the dual-8 nixie
tube will flash about 30s when the unit is turned on each time
to remind the user to clean the filter; you can turn off this cycle
reminder by holding " On/Off " and "
5s and then the air conditioner will count time again.
54
blank
No Setting
mode is lower than that of
" buttons simultaneously, you can
blank
No Setting
" with remote controller, temperature
" buttons simultaneously for
NOTE:
● Once the reminder function is turned on, only this cycle reminder
can be cleared.
● This function is only available for some models.
Auto clean function
Under unit off status, hold "Mode" and "
for 5s to turn on or turn off the auto clean function. When the
auto clean function is turned on, indoor unit displays "CL". During
the auto clean process of evaporator, the unit will perform fast
cooling or fast heating. There may be some noise, which is the
sound of flowing liquid or thermal expansion or cold shrinkage.
The air conditioner may blow cool or warm air, which is a normal
phenomenon. During cleaning process, please make sure the
room is well ventilated to avoid affecting the comfort.
NOTE:
● The auto clean function can only work under normal ambient
temperature. If the room is dusty, clean it once a month; if not,
clean it once every three months. After the auto clean function is
turned on, you can leave the room. When auto clean is finished,
the air conditioner will enter standby status.
● This function is only available for some models.
Night mode
Under cooling or heating mode, when turning on sleep mode and
turn to low speed or quiet notch, the outdoor unit would enter into
night mode.
NOTE:
● When you feel that the cooling and heating effect is poor, please
press "Fan" button to other fan speed or press "Sleep" button to
exit the night mode.
● T h e n i g h t m o d e c a n o n l y w o r k u n d e r n o r m a l a m b i e n t
temperature.
● This function is only available for some models.
I FEEL function
Press "Health" and " + " buttons simultaneously to start I FEEL
function and " " will be displayed on the remote controller.
After this function is set, the remote controller will send the
detected ambient temperature to the controller and the unit
will automatically adjust the indoor temperature according to
the detected temperature. Press "Health" and " + " buttons
simultaneously again to turn off I FEEL function and "
disappear.
● Please put the remote controller near user when this function
Service Manual
" buttons simultaneously
" will
Technical Information