Gree GWH09YCXB-K6DNA1C Service Manual page 55

● Set temperature range from remote controller: 16~30°C (61~86°F).
● This mode indicator is not available for some models.
● Cooling only unit won't receive heat mode signal. If setting heat
mode with remote cont roller, press "On/Off" button can't start up
the unit.
3. Fan button
This button is used for setting Fan Speed in the sequence that
goes from AUTO, , ,
Auto.
Auto
Low speed Low-Medium speed
Medium-High speed
Turbo speed
NOTE:
● It's low fan speed under dry mode.
● X-FAN function: Holding fan speed button for 2s in cool or dry
mode, the icon " " is displayed and the indoor fan will continue
operation for a few minutes in order to dry the indoor unit even
though you have turned off the unit. After energization, X-FAN
OFF is defaulted. X-FAN is not available in auto, fan or heat
mode.
This function indicates that moisture on evaporator of indoor unit
will be blowed after the unit is stopped to avoid mould.
● Having set X-FAN function on: After turning off the unit by
pressing "On/Off" button, indoor fan will continue running for a few
minutes at low speed. In this period, hold fan speed button for 2s
to stop indoor fan directly.
● Having set X-FAN function off: After turning off the unit by
pressing "On/Off" button, the complete unit will be off directly.
4. - / + button
Press " + " or " - " button once increase or decrease set
temperature 1°C(°F). Holding " + " or " - " button, 2s later, set
temperature on remote controller will change quickly. On releasing
button after setting is finished, temperature indicator on indoor unit
will change accordingly.
5. Wifi button
Press "Wifi" button to turn on WiFi function, "Wifi" icon will
be displayed on the remote controller; Hold "Wifi" button for
5s to turn off WiFi function and "Wifi" icon will disappear.
Under off status, press "Mode" and "Wifi" buttons simultaneously
for 1s, WiFi module will restore factory settings.
52
, , , to then back to
Medium speed
High speed
Quiet speed
NOTE:
● This function is only available for some models.
6. Health button
Press this button to turn on or turn off the health and scavenging
functions in operation status. Press this button for the first
time to start scavenging function; LCD displays "
the button for the second time to start health and scavenging
functions simultaneously; LCD displays "
button for the third time to quit health and scavenging functions
simultaneously. Press the button for the fourth time to start health
function; LCD display " ".
Press this button again to repeat the operation above.
NOTE:
● This function is only available for some models.
7. UD-swing button
Press this button can select up & down swing angle. Fan blow
angle can be selected circularly as below:
no display
(horizontal louvers stops
at current position)
● When selecting " ", air conditioner is blowing fan automatically.
Horizontal louver will automatically swing up & down at maximum
angle.
● When selecting " , ,
fan at fixed position. Horizontal louver will stop at the fixed
position.
● Hold " " button above 2s to set your required swing angle.
When reaching your required angle, release the button.
NOTE:
● Press this button continuously more than 2s, the main unit will
swing back and forth from up to down, and then loosen the button,
the unit will stop swinging and present position of guide louver will
be kept immediately.
● Under swing up and down mode, when the status is switched
from off to , if press this button again 2s later,
switch to off status directly; if press this button again within 2s,
the change of swing status will also depend on the circulation
sequence stated above.
8. LR-swing button
Press this button can select left & right swing angle. Fan blow
angle can be selected circularly as below:
Service Manual
". Press
" and " ". Press this
, , ", air conditioner is blowing
status will
Technical Information