Step
7. Remove axial flow blade
Twist off the nuts on blade with wrench and then
remove the axial flow blade.
8. Remove electric box assy
Twist off the screws on electric box, cut off the tieline
with scissors or pliers, pull out the wiring terminal, pull it
upwards to remove the electric box.
9. Remove motor and motor support
Twist off the tapping screws fixing the motor, pull out
the pin of leading wire for motor and then remove the
motor.
Twist off the tapping screws fixingthe motor support,
pull it upwardsand then remove the motor support.
124
Procedure
Axial flow blade
Nut
Motor support
Motor
Service Manual
Electric box assy
Installation and Maintenance