Performing The Hotsync ® Operation - Sony CLIE PEG-TJ27 Handbook

Performing the IR HotSync
2
Click
area) at the bottom right of the computer window once again,
and select [Setup...] from the shortcut menu.
The Setup window is displayed.
3
Click [Local].
4
Adjust the following settings as needed.
• Serial port: Specifies a virtual port for an infrared port. If you are not
sure of the connection port, refer to [Infrared Monitor] in [Control
Panel].
• Speed: Determines the speed at which files/data are transferred. Try
the rate, as [As Fast As Possible] first, and adjust downward if you have
any problems.
5
Tap [OK].
The IR HotSync
Note
When performing the local HotSync
the local HotSync settings.
b
For details, refer to "To restore the local HotSync settings" on page 120.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
operation
(HotSync) in the Windows task tray (Notification
®
operation is enabled.
®
operation with a USB cable, you need to restore
®
operations)
®
119