To Transmit And Receive A Call; Utility Functions; Locking The Keypad - Midland MXT275VP4 Manual

Transmitting and Receiving a Call
IMPORTANT! To communicate between two radios, both radios must
be set to the same channel and Privacy Code (see Selecting a Privacy
Code) selections.

To transmit and receive a call:

.
Be sure the radio is turned on (see Power On/Off)
1
2. To transmit a call, press and hold the PTT button on the microphone,
and speak into the microphone in a normal voice.
NOTE: For maximum clarity, hold the microphone 2 to 3 inches from your
mouth when speaking.
▪
The TX icon will show continuously on the LCD display while
transmitting.
3. To receive a call, release the PTT button on the microphone.
▪
The RX icon will show on the LCD display when your radio is receiv-
ing a transmission.
4. If necessary, press the Volume Up or Volume Down buttons to
increase or decrease the radio volume.

UTILITY FUNCTIONS

Utility functions let you configure several operational parameters of the
MXT275 to suit your personal preferences. For additional functions, see
"MENU" MODE FUNCTIONS.

Locking the Keypad

You can use the keypad "lock" function to prevent accidentally changing
your radio's settings. When the function is enabled, the current radio
settings are "locked" in place.
NOTE: When the "lock" function is enabled, the PTT button, Volume
Buttons and the Call Button on the microphone remain active.
midlandusa.com
Model MXT275
Page 15