Operating From The Remote Control - DeLonghi Arctic Whisper EL Series Manual

Table of Contents

Advertisement

Available languages

Available languages

Notes:
In this mode, the air flow is selected automatically by the
appliance and cannot be set manually.
When operating in very cold rooms, the appliance defreez-
es automatically, momentarily interrupting normal opera-
tion. In this case, " Lt " appears on the display. During this
operation, it is normal for the noise made by the appliance
to change.
In this mode, you may have to wait a few minutes before
Perfect!
the appliance starts giving out hot air.
In this mode, the fan may operate for short periods, even
though the set temperature has already been reached.
It may happen that the display shows "HL" alarm. In this
case, empty the internal safety tank following the instruc-
tions in the Section "End of Season operations". At the end,
press again the
button to restore the heating function.
ECO REAL FEEL FUNCTION
ECO REAL FEEL is the innovative De'Longhi
technology that works simultaneously on
temperature reduction and humidity
control, securing best comfort level.
With traditional systems, during working
time, optimal comfort conditions may be
reached but not secured over time. With
ECO REAL FEEL, once optimal comfort is
reached, PAC automatically modulates
compressor action and air flow, to keep it
over time.
To activate the function, touch repeatedly
the MODE key until the Real symbol appears.
HIGH
MEDIUM
LOW
TEMPERATURE
After
approx. 1 minute, the
symbol
(C16)
changes
ing the best comfort level (see following diagram).
Operating curve
ECO REAL FEEL-
color
when
approach-
ORANGE LIGHT: Room conditions far
from optimal level.
GREEN LIGHT: Most people feel good
room conditions, near optimal level.
BLUE LIGHT: Best comfort level.
Perfect!
The well-being feeling is a subjective condition: for this
reason, different people may judge differently the same
environmental conditions.
In particularly severe environmental conditions (large size
of the environment, high temperature or humidity outside,
poor insulation of the room, too many of people or strong
heat load in the room, strong exposure to the sun ...) this
device may not be able to reach the best comfort level.
SELECT THE TEMPERATURE SCALE

OPERATING FROM THE REMOTE CONTROL

INSERTING OR REPLACING THE BATTERIES
Remove the cover on the rear of the remote control;
Insert or replace the batteries with two new R03 "AAA" 1.5V
batteries, inserting them correctly (see the instructions in-
side the battery compartment);
Replace the cover.
If the remote control unit is replaced or discarded, the batteries
must be removed and disposed of in accordance with current
legislation as they are harmful to the environment. Do not mix
old and new batteries.
9
The temperature can be displayed in
°C or °F.
To change the temperature unit of
measure touch both the increase/
decrease keys
and
10 sec.
for about

Advertisement

Table of Contents
loading

Table of Contents