Table of Contents
Advertisement
No
signal
can't
detected.
Operate
output,
respond
No voltage and current
signals for input channel
EIO1616 Bus Expansion Module User Manual V1.5
1.
Check whether IO power is needed.
2.
Check whether the limit sensor works normally, and
whether the "input" view can watch the signal change
be
of the limit sensor.
3.
Check whether the mapping of the limit switch is
correct.
4.
Check whether the limit sensor is connected to the
public end of the controller.
1.
Check whether IO power is needed.
no
2.
Check whether output No. is matched with the one
that is operated.
1.
Check whether IO power is needed.
2.
Check whether output No. is matched with the one
that is operated.
Advertisement
Table of Contents
