Table of Contents
Advertisement
5)
The state value of the corresponding input port can be directly read through the "IN"
command, and the state of the input port can also be visually checked through the
"ZDevelop/View/IN" interface or the IO indicator light on the expansion module. For
details, see "ZBasic Programming Manual".
6)
The port can be turned on or off directly through the "OP" command, or it can be
turned on or off by clicking directly on the "ZDevelop/View/OP" interface, or the IO
indicator on the expansion module can visually check the output port status. For
details, see "ZBasic Programming Manual".
EIO1616 Bus Expansion Module User Manual V1.5
Advertisement
Table of Contents
