Table of Contents
Advertisement
Door Removal
CAUTION
TO PREVENT PERSONAL
INJURY
Before removing the doors,
make sure the pins are properly
installed in the hinges. Failure
to do so can result in personal
injury to hands and/or fingers.
Door Replacement
1
Carefully realign door on hinges.
Slide in and down
4
Close door.
1
Open door completely. Fold latches back
until locked in place
3
Close door until pins stop door
2
Open door completely.
Fold latches forward until locked in place.
5
2
Remove hinge screws and hinge
trim
4
Lift door up and out.
3
Remove pins from holes in hinge
If the door needs to be adjusted, loosen hinge
trim screws (see step 2). Adjust the screws
located between the door and kickplate using
a 5/32" hex head allen wrench. After
adjustment, tighten hinge trim screws.
29
Advertisement
Table of Contents
