Roasting; Conv Roast - Viking VESC30 Use & Care Manual

Freestanding electric and induction self-clean ranges
Table of Contents

Advertisement

Roasting

CONV ROAST* (Convection Roast)
The convection element runs in conjunction with the inner and outer broil elements.
The reversible convection fan runs at a higher speed in each direction. This transfer
of heat (mainly from the convection element) seals moisture inside of large roasts. A
time savings is gained over existing, single fan convection roast modes. Use this
setting for whole turkeys, whole chickens, hams, etc.
*Note: This function uses a high-speed convection fan for optimum cooking
performance. Some noise may be noticed from this high fan speed. This is normal.
Note: You can also roast foods using bake settings. See the "Baking" section for
additional information.
Roasting Tips
ALWAYS use the broiler pan and grid. The hot air must be allowed to circulate around the item being roasted. DO NOT
cover what is being roasted. Convection roasting seals in juices quickly for a moist, tender product. Poultry will have a light,
crispy skin and meats will be browned, not dry or burned. Cook meats and poultry directly from the refrigerator. There is no
need for meat or poultry to stand at room temperature.
• As a general rule, to convert conventional recipes to convection recipes, reduce the temperature by 25°F (-3.9°C) and the
cooking time by approximately 10 to 15%.
• ALWAYS roast meats fat side up in a shallow pan using a roasting rack. No basting is required when the fat side is up. DO
NOT add water to the pan as this will cause a steamed effect. Roasting is a dry heat process.
• Poultry should be placed breast side up on a rack in a shallow pan. Brush poultry with melted butter, margarine, or oil
before and during roasting.
• For convection roasting, DO NOT use pans with tall sides as this will interfere with the circulation of heated air over the
food.
• If using a cooking bag, foil tent, or other cover, use the conventional bake setting rather than either convection setting.
• When using a meat thermometer, insert the probe halfway into the center of the thickest portion of the meat. (For poultry
insert the thermometer probe between the body and leg into the thickest part of the inner thigh.) The tip of the probe
should not touch bone,
fat, or gristle to ensure an accurate reading. Check the meat temperature halfway through the recommended roasting time.
After reading the thermometer once, insert it
second temperature registers below the first, continue cooking the meat.
• Roasting times ALWAYS vary according to the size, shape and quality of meats and poultry. Less tender cuts of meat are
best prepared in the conventional bake setting and may require moist cooking techniques. Remove roasted meats from the
oven when the thermometer registers 5°F (-15°C) to 10˚ F (-12°C) lower than the desired doneness. The meat will continue
to cook after removal from the oven. Allow roasts to stand 15 to 20 minutes after roasting in order to make carving easier.
inch (1.3 cm) further into the meat, then take a second reading. If the
1
2
18
convection roast

Advertisement

Table of Contents
loading

Table of Contents