Related Manuals for CareCo ZEST
Summary of Contents for CareCo ZEST
- Page 1 Scan me on your phone camera to watch our assembly video. ROLLATOR USER MANUAL WA02010038.AGN PRODUCT CODE:...
-
Page 2: Read Before Use
WA02010038.AGN PRODUCT CODE INTRODUCTION The CareCo Zest has been designed to enhance independence and confidence with every step. With a convenient folding mechanism that allows hassle-free, compact storage options and a spacious underseat bag, this rollator is the perfect aid for users with limited mobility. -
Page 3: Safety Instructions
QR code with your phone camera to play the video. Visually impaired users can view this manual in PDF format at the following URL: www.careco.co.uk SAFETY INSTRUCTIONS • Only use the rollator for its intended use, incorrect use can lead to hazard- ous situations. -
Page 4: Parts Description
WA02010038.AGN PRODUCT CODE PARTS DESCRIPTION 1. Hand Grip 5. Frame MAXIMUM CARRY 2. Brake 6. Front Wheel 5 KG BAG LOAD: 3. Backrest 7. Rear Wheel 4. Storage Bag... -
Page 5: Product Identification
UNPACKING Remove all outer packaging before placing components on a level surface. Contact CareCo immediately if any parts are missing from the product box. PRODUCT IDENTIFICATION The product identification label is located on the cross-frame underneath the seat. - Page 6 WA02010038.AGN PRODUCT CODE ASSEMBLY Place the rollator upright on its wheels. Push downwards on the central bar to open the rollator (1). Insert the handle tube into the frame (2) and secure using the triangular knob provided (3). Repeat on the other side. Insert the backrest into the frame brackets (4).
-
Page 7: Handle Height Adjustment
HANDLE HEIGHT ADJUSTMENT To set the correct handle height, stand upright behind the rollator with arms by side. Adjust the height of the hand grips so they are level with the users’ wrists. Loosen the triangular knob by turning it anticlockwise before removing it from the bracket. Lift or lower handle to the desired height Reinsert the triangular knob into the handle bracket and tighten by turning it clockwise Repeat on the opposite side... -
Page 8: Applying The Brakes
WA02010038.AGN PRODUCT CODE APPLYING THE BRAKES STOPPING Gradually squeeze both brake levers to stop the rollator. Release the brake levers to start moving again. TURNING Squeeze the left and right brake levers individually to rotate the rollator. Release the brake lever to stop rotating. LOCKING Push both brake levers downwards to apply the brake lock. - Page 9 FOLDING Push both brake levers Lift the backrest upwards to Lift the seat upwards to downwards to apply the fold the backrest. reveal the bag contents. brake lock. Pull the folding strap upwards to fold the rollator.
- Page 10 WA02010038.AGN PRODUCT CODE UNFOLDING Push downwards on the central bar to open Lower the seat the rollator Unfold the backrest. Pull both brake levers upwards to unlock the brakes. Keep hands and body away from cross frame pivot to avoid possible pinch points. Ensure the rollator is secure before use.
- Page 11 BACKREST ATTACHING REMOVING Secure the backrest to the frame by locating Remove the backrest by pressing the button the button spring clips into the bracket. spring clips and pulling the backrest upwards. FOLDING Raise the backrest to fold. UNFOLDING Lower the backrest to unfold. Ensure the backrest is secure before using the rollator as a seat.
-
Page 12: Cleaning & Hygiene
WA02010038.AGN PRODUCT CODE SITTING Ensure the rollator is on a flat and even surface and the locking brakes are applied. Do not use the product as a transportation device. HANDLING & TRANSPORTING Carry the rollator using the rubber handles and/or areas of the frame that are clear of pinch points. -
Page 13: Maintenance
MAINTENANCE By performing simple maintenance, the user can extend the life expectancy of the rollator. • Check fasteners regularly and tighten if necessary • Check tyre condition regularly • Check brake functionality • Check wheels move freely • Check upholstery for wear ADJUSTMENTS BRAKE CABLE ADJUSTMENT Difficulty Level... -
Page 14: Specifications
WA02010038.AGN PRODUCT CODE SPECIFICATIONS Length (mm) Width (mm) Height (mm) 777 ~ 932 Height adjustable range (mm) 777 ~ 932 Seat height (mm) 525+/-1 (front) and 528+/-1 (rear) Seat thickness (mm) Seat width (mm) Seat depth (mm) Folded width (mm) Folded length (mm) Folded height (mm) Hand grip to hand grip distance (mm) -
Page 15: Recycling And Disposal
RECYCLING & DISPOSAL Disposal or recycling of the rollator should be completed through an approved distributor or disposal facility. (Local disposal & recycling regulations may apply) Alternatively, contact CareCo for advice on disposal. Materials: Packaging: Aluminium: • Cardboard Box • Low-density polythene bag •... -
Page 16: Intended User
WA02010038.AGN PRODUCT CODE INTENDED USE To provide additional stability and support to users whilst walking. INTENDED USER To aid any user with mobility limitations to walk independently and safely. INTENDED ENVIRONMENT This product is intended for use both indoors and outdoors on flat, firm surfaces. EXPECTED LIFETIME The Expected Lifetime is the estimated period of time for which the rollator is expected to function according to its intended use. -
Page 17: Warranty
WARRANTY If a component requires repair or replacement due to a specific manufacturing or material defect within its warranty period, it will be repaired or replaced free of charge by CareCo. • 1-YEAR LIMITED WARRANTY Consumables are not covered under normal warranty circumstances unless they have clearly suffered excessive wear or damage as a direct result of a manufacturing defect. - Page 18 056059 114323 ROLLATOR...
Need help?
Do you have a question about the ZEST and is the answer not in the manual?
Questions and answers