Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CareCo WA01055
Summary of Contents for CareCo WA01055
- Page 1 Atlas Rollator Product Code: WA01055 OWNERS HANDBOOK www.careco.co.uk...
- Page 2 Your CareCo Atlas Rollator List of Parts Backrest Adjustable parking / running brake Seat Height adjustable handles Swivel front castors Shopping bag...
-
Page 3: Specification
Introduction Thank you for purchasing the CareCo Atlas Rollator. The Atlas Rollator has been designed and manufactured to meet our own high level of specifications and we hope you will be delighted with your purchase. The Atlas Rollator has been designed as a... - Page 4 The intended user should possess the necessary physical, visual and cognitive skills to operate the rollator safely. If you have any doubt, please consult your GP. It is important that the user reads and understands the safety advice given within this manual before attempting to operate the product to avoid possible injury to the user or bystanders and avoid damage to the rollator or...
- Page 5 Don’t: • Use the rollator as an aid to transport persons, it is not designed as a wheelchair. • Sit on the rollator if the brakes are not locked, this could cause the rollator to move resulting in injury to the user or other persons.
- Page 6 Fold out the rear leg and secure the legs in place with the handknobs. Always take care to ensure that the handknob locates through the hole in the leg and into the nut on the frame. Opening and Folding To open your rollator push down on either side of the cross bars as shown below.
-
Page 7: Handle Adjustment
Handle Adjustment The rollator’s handles can be adjusted in height to suit different users. Simply depress the spring button and set to the desired height. Repeat for the The spring opposite side and button hould make sure that both be locted handles are secure in the same and set at the same... -
Page 8: Maintenance
Brake adjustment is carried out as follows: Locking nut Adjustment screw Turn the adjuster screw anti-clockwise to increase the tension then lock the adjustment by turning the locking nut clockwise whilst holding the adjuster screw stationary. Brake adjustment reduced to allow light pressure may be ineffective on the brake in the locked position. -
Page 9: Warranty
If you have any queries please contact CareCo. The manufacturer reserves the right to alter without notice any weights, measurements or other technical data shown in this manual. All...
Need help?
Do you have a question about the WA01055 and is the answer not in the manual?
Questions and answers