CareCo Pano Walker Usage And Maintenance Instructions

CareCo Pano Walker Usage And Maintenance Instructions

Advertisement

Usage and Maintenance Instructions

Identification of parts

Adjusting the height

Using height adjuster to adjust the handles on both sides to the desired height.
The handles should be level with the wrist.
The height of the handle can be adjusted through the holes. To adjust the height, loosen and remove the screws on both
sides and adjust the bar to the desired height.
Secure both screws into the appropriate hole.
www.careco.co.uk

Important

Please read the instruction manual and installation instructions
before using the Pano Walker.
Observe the safety warnings indicated and ensure that only
persons familiar with these use the rollator. Keep manual for
future use and attach it if you transfer the product.
Seat
CareCo, Hubert Road, Brentwood, Essex, CM14
Pano Walker - WA01071
Hand grip
Height adjuster
Wheel

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pano Walker and is the answer not in the manual?

Questions and answers

Summary of Contents for CareCo Pano Walker

  • Page 1 Pano Walker - WA01071 Important Please read the instruction manual and installation instructions before using the Pano Walker. Observe the safety warnings indicated and ensure that only persons familiar with these use the rollator. Keep manual for future use and attach it if you transfer the product.
  • Page 2 This warranty expresses our confidence in the workmanship and materials used for our products. In the event of a defect covered by this warranty, CareCo will, at our discretion, replace the product or supply parts to remedy. This warranty does not cover device failure due to owner misuse or negligence, or due to normal wear and tear.

Table of Contents