Install The Pa-7080 Firewall In The Front-Mount Position - PaloAlto Networks TECHDOCS PA-7000 Series Hardware Reference Manual

PA-7000 Series Firewall Installation
rack#mount screws (not included) on each side of the chassis and tighten with a Phillips-head
screwdriver.

Install the PA-7080 Firewall in the Front-Mount Position

The following procedure describes how to install the PA-7080 firewall in a mid-mount position.
Both rack#mount bracket types (mid-mount and front-mount) are preinstalled. For a front-mount
install, you must remove the mid-mount brackets.
The PA-7080 chassis and the front slot cards (SMC, LPC or LFC, NPC) ship in separate
boxes and it is recommended that you install the cards after the chassis is rack mounted.
This will prevent any damage to the cards that could occur during rack mounting and will
reduce the weight of the chassis.
STEP 1 | Read PA-7000 Series Firewall Rack Install Safety
PA-7000 Series Firewall Hardware Reference
Information.
79
2023 Palo Alto Networks, Inc.
©