PA-7000 Series Firewall Installation
STEP 6 |
Attach the chassis brackets to the rack using the provided rack mount screws and tighten
with a Phillips-head screwdriver. Install all four screws on each side of the chassis.
Install the PA-7080 Firewall in the Mid-Mount Position
The following procedures describe how to install the PA-7080 firewall in a mid-mount position.
Both rack#mount bracket types (mid-mount and front-mount) are preinstalled. For a mid-mount
install, you must remove the front-mount brackets.
The PA-7080 chassis and the front slot cards (SMC, LPC or LFC, NPC) ship in separate
boxes and it is recommended that you install the cards after the chassis is rack mounted.
This will prevent any damage to the cards that could occur during rack mounting and will
reduce the weight of the chassis.
STEP 1 |
Read
PA-7000 Series Firewall Rack Install Safety
PA-7000 Series Firewall Hardware Reference
Information.
76
2023 Palo Alto Networks, Inc.
©