Pa-7000 Series Firewall Smc-B Requirements; Interpret The Pa-7000 Series Firewall Smc Leds - PaloAlto Networks TECHDOCS PA-7000 Series Hardware Reference Manual

Firewall
Hide thumbs Also See for TECHDOCS PA-7000 Series:
Table of Contents

Advertisement

PA-7000 Series Firewall Module and Interface Card Information
Item
Component

PA-7000 Series Firewall SMC-B Requirements

The following information describes the system and hardware requirements for the second-
generation Switch Management Card (SMC-B).
If you install the Switch Management Card (SMC-B), Log Forwarding Card (LFC), or
PA-7000 100G NPC in a PA-7050 firewall, you must install the second-generation fan
trays (PA-7050-FANTRAY-L-A and PA-7050-FANTRAY-R-A). If you install these cards
in a PA-7080 firewall, you must also install the electromagnetic interference (EMI) filter.
You do not have to install these components if the last five digits of the firewall serial
number is 10,000 or greater because the PA-7050 will have the second-generation fan
trays installed and the PA-7080 will have a built-in EMI filter.
• PAN-OS 9.0 or later.
Install the PA-7000 Series Firewall Log Forwarding Card (LFC)
(PA-7050
only) Install the second-generation fan tray to increase cooling capacity. The
a PA-7050 Fan Tray
• Remove PA-7000 20G NPCs (not compatible with the SMC-B).
• (PA-7080 only)

Interpret the PA-7000 Series Firewall SMC LEDs

Use the following information to learn how to interpret the LED dashboard located on the first-
generation and second-generation
The only difference between the first-generation SMC and the second-generation SMC-B LEDs is
that the LOG LED on the SMC-B is replaced with a service (SVC) LED.
PA-7000 Series Firewall Hardware Reference
Description
• PA-7080 SMC— Two levers used to install and remove
topic shows how to install a fan tray.
Install the PA-7080 Firewall EMI Filter
PA-7000 Series Firewall Switch Management Cards
screws, pull the inner lever toward you to unlock the
outer lever from the chassis and then pull the outer
lever toward you to release the card from the chassis.
The left and right inner levers have micro-switches that
power off the card when they are pulled.
the SMC.
to reduce electromagnetic interference.
41
Replace
(SMCs).
2023 Palo Alto Networks, Inc.
©

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pa-7050Pa-7080

Table of Contents