Replace A Pa-7000 Series Ac Power Supply - PaloAlto Networks TECHDOCS PA-7000 Series Hardware Reference Manual

Service the PA-7000 Series Firewall Hardware
LEDs Description
• Fault—Red indicates a power supply failure, blinking indicates that the
management plane cannot communicate with the power supply and off indicates
no issues.
PA-7080 Power Supply LEDs
Use the following information to learn how to interpret the LEDs on the PA-7080 AC power
supply.
LEDs Description
• Input—Green indicates that the power supply input is within normal limits,
blinking indicates power input is out of normal limits, and off indicates no power
input.
• Output—Green indicates that the power supply DC output to the chassis
components are within normal limits, blinking indicates power overload, and off
indicates no DC output power.
• Warning—Yellow indicates that the power supply temperature is exceeded,
blinking indicates that the power supply needs service and should be replaced,
and off indicates no warning.
• Fault—Red indicates a power supply failure, blinking indicates that the
management plane cannot communicate with the power supply, and off indicates
no issues.
The following table describes the PA-7080 DC power supply LEDs.
LEDs Description
• Input—Green indicates that the power supply input is within normal limits and off
indicates no power input.
• Output—Green indicates that the power supply DC output to the chassis
components are within normal limits and blinking indicates overload.
• Warning—Yellow indicates that the power supply temperature is exceeded and
off indicates no warning.
• Fault—Red indicates a power supply failure and off indicates no issues.

Replace a PA-7000 Series AC Power Supply

• Replace a PA-7050 AC Power Supply
• Replace a PA-7080 AC Power Supply
PA-7000 Series Firewall Hardware Reference
131
2023 Palo Alto Networks, Inc.
©