Advertisement
1. Load the paper in the manual tray.
•
Do not force the paper beyond the surface with
when loading.
•
When printing the special media, you must follow the
loading guideline. (See "Printing on special media" on
page 38.)
•
When papers overlap when printing using manual tray,
open tray 1 and remove overlapping papers then try
printing again.
•
When paper does not feed well while printing, push the
paper in manually until it starts feeding automatically.
2. Squeeze the manual tray paper guides and adjust them to the width
of the paper. Do not force them too much, or the paper will bent
resulting in a paper jam or skew.
3. To print in application, open an application and start the print menu.
4. Open Printing Preferences. (See "Opening printing preferences" on
page 42.)
5. Press the Paper tab in Printing Preferences, and select an
appropriate paper type.
For example, if you want to use a label, set the paper type to
Label.
6. Select Manual Feeder in paper source, then press OK.
7. Start printing in application.
If you are printing multiple pages, load the next sheet after the first
page prints out, and press the
for every page to be printed.
PRINTING ON SPECIAL MEDIA
The table below shows the available special media for each tray.
When using special media, we recommend you feed one paper at a
time. Check the maximum input number of media for each tray. (See
"Print media specifications" on page 69.)
TYPES
TRAY 1
Plain
O
Thick
O
Thin
O
Bond
X
Color
X
CardStock
X
mark
(cancel button). Repeat this step
MANUAL TRAY
O
O
O
O
O
O
Media and tray_ 38
TYPES
TRAY 1
Labels
X
Transparency
X
Envelope
X
Preprinted
X
Cotton
X
Recycled
O
Archive
O
The media types are shown in the Printing Preferences. This paper type
option allows you to set the type of paper to be loaded in the tray. This
setting appears in the list, so that you can select it. This will let you get the
best quality printout. If not, the desired print quality may not be achieved.
•
Plain: Normal plain paper. Select this type if your machine is
monochrome and printing on the 60 g/m
2
•
Thick: 90 to 105 g/m
(24 to 28 lb) thick paper.
2
•
Thin: 60 to 70 g/m
(16 to 19 lb) thin paper.
2
•
Bond: 105 to 120 g/m
(28 to 32 lb) bond.
2
•
Color: 75 to 90 g/m
(20 to 24 lb) color-backgrounded paper.
2
•
CardStock: 90 to 163 g/m
2
•
Labels: 120 to 150 g/m
(32 to 40 lb) labels.
•
Transparency: 138 to 146 g/m
2
•
Envelope: 75 to 90 g/m
(20 to 24 lb) envelope.
2
•
Preprinted: 75 to 90 g/m
(20 to 24 lb) preprinted/letterhead paper.
2
•
Cotton: 75 to 90 g/m
(20 to 24 lb) preprinted paper.
2
•
Recycled: 75 to 90 g/m
(20 to 24 lb) recycled paper.
2
•
Archive: 70 to 90 g/m
(19 to 24 lb) If you need to keep the print-out for
a long period time, such as archives, select this option.
Envelope
Successful printing on envelopes depends upon the quality of the
envelopes.
To print an envelope, place it flap side down with the stamp area on the
bottom right side.
If envelopes are printed out with wrinkles, crease or black bold lines, open
the rear cover and pull down the pressure lever and try printing again. Keep
the rear cover opened during printing.
MANUAL TRAY
O
O
O
O
O
O
O
2
(16 lb) cotton paper.
(24 to 43 lb) cardstock.
2
(37 to 39 lb) transparency paper.
Advertisement
