Advertisement
•
MAC Address : Find the machine's MAC address from the
Network Configuration Report and enter it without the colons.
For example, 00:15:99:29:51:A8 becomes 0015992951A8.
•
IP Address: Enter a new IP address for your printer.
For example, if your computer's IP address is 192.168.1.150,
enter 192.168.1.X. (X is number between 1 and 254 other than
the computer's address.)
•
Subnet Mask: Enter a Subnet Mask.
•
Default Gateway: Enter a Default Gateway.
6. Select Apply, then OK, and OK again. The printer will automatically
print the configuration report. Confirm that all the settings are correct.
Quit Safari. You may close and eject the installation CD-ROM. If
necessary, restart the computer's firewall. You have successfully
changed the IP address, subnet mask, and gateway.
IP setting using SetIP Program (Linux)
SetIP program should be automatically installed during the printer driver
installation.
1. Print the machine's network configuration report to find your
machine's MAC address.
2. Open the /opt/Samsung/mfp/share/utils/.
3. Double click the SetIPApplet.html file.
4. Click to open the TCP/IP configuration window.
5. Enter the network card's MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
6. The machine prints the network information. Confirm all the settings
are correct.
7. Close the SetIP program.
Network parameter setting
You can also set up the various network settings through the network
administration programs such as SyncThru™ Web Admin Service and
SyncThru™ Web Service.
Restoring factory default settings
You may need to reset the machine to the factory default settings when
machine that you are using is connected to new network environment.
Restoring factory default settings using SyncThru™
Web Service
1. Start a web browser such as Internet Explorer, Safari or Firefox and
enter your machine's new IP address in the browser window.
For example,
2. When the SyncThru™ Web Service window opens, click Network
Settings.
INSTALLING NETWORK CONNECTED
MACHINE'S DRIVER
Windows
You can set up the machine driver, follow the steps below.
This is recommended for most users. All components necessary for
machine operations will be installed.
1. Make sure that the machine is connected to the network or USB and
2. Insert the supplied software CD into your CD-ROM drive.
3. Select Install now.
Network setup (ML-2580 Series only)_ 30
3. Click Reset. Then, click Clear for network.
4. Turn off and restart machine to apply settings.
powered on.
•
The software CD should automatically run and an installation window
appear.
•
If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your drive. Click OK.
•
If you use Windows Vista, click Start > All programs > Accessories
> Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your drive and click OK.
•
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
If necessary, select a language from the drop-down list.
The Advanced Installation has two options, Custom Installation
and Install Software Only. The Custom Installation allows you
to select the machine's connection and choose individual
component to install. The Install Software Only allows you to
Advertisement
