Advertisement
1. Make sure that the machine is connected to your computer and powered
on.
If the "New Hardware Wizard" window appears during the
installation procedure, click
to close the window, or click Cancel.
2. Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation window
appear.
•
If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your drive. Click OK.
•
If you use Windows Vista, click Start > All programs > Accessories
> Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your drive and click OK.
•
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
3. Select Install now.
If necessary, select a language from the drop-down list.
4. Read License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
The program searches the machine.
•
The Advanced Installation has two options, Custom
Installation and Install Software Only. The Custom
Installation allows you to select the machine's connection and
choose individual component to install. The Install Software
Only allows you to install the supplied softwares, such as
in the upper right corner of the box
Getting started_ 25
Smart Panel. Follow the guide on the window.
•
If your machine is not connected to the computer, the following
window will appear.
-
After connecting the machine, click Next.
-
If you don't want to connect the machine at this time, click
the check box beside of Check if you want to install the
software without connecting the printer to the network
or locally.. In this case, the print a test page window will be
skipped, and completes the installation.
-
The installation window in this User's Guide may differ
depending on the machine and interface in use.
5. When the printer connection confirmation window appears, check the
printer name and click Next.
6. After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and skip to step 7.
7. If the test page prints out correctly, click Yes.
If not, click No to reprint it.
8. To register as a user of the machine in order to receive information from
Samsung, click On-line Registration. You are now registered to the
Samsung web site.
9. Click Finish.
If the printer driver does not work properly, follow the steps below to
repair or reinstall the driver.
a) Make sure that the machine is connected to your machine and
Advertisement
