Advertisement
network setup (ml-2580 series only)
3.
This chapter gives you step-by-step instructions for setting up the network connected machine and software.
This chapter includes:
•
Network environment
•
Introducing useful network programs
•
Using a wired network
NETWORK ENVIRONMENT
You need to set up the network protocols on the machine to use it as your
network machine. You can set up the basic network settings through the
machine's control panel.
The following table shows the network environments supported by the
machine:
ITEM
Network interface
Network operating system
Network protocols
INTRODUCING USEFUL NETWORK PROGRAMS
There are several programs available to setup the network settings easily in
network environment. For the network administrator especially, managing
several machines on the network is possible.
Before using the programs below, set the IP adress first.
SyncThru™ Web Service
Web server embedded on your network machine, which allows you to:
•
Configure the network parameters necessary for the machine to connect
to various network environments.
•
Customize machine settings.
(See "Using SyncThru™ Web Service (ML-2580 Series only)" on
page 49.)
REQUIREMENTS
Ethernet 10/100 Base-TX
•
Windows 2000/XP/2003/2008/Vista
•
Various Linux OS
•
Mac OS X 10.3 ~ 10.6
•
TCP/IPv4
•
DHCP, BOOTP
•
DNS, WINS, Bonjour, SLP, UPnP
•
Standard TCP/IP Printing (RAW), LPR,
IPP
•
SNMPv 1/2/3, HTTP (S), Telnet, SMTP,
LDAP, IPSec
•
TCP/IPv6 (DHCP, DNS, RAW, LPR,
SNMPv 1/2/3, HTTP (S), IPSec
(See "IPv6 Configuration" on page 32.)
Network setup (ML-2580 Series only)_ 28
•
Installing network connected machine's driver
•
IPv6 Configuration
SyncThru™ Web Admin Service
Web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of
managing network devices and lets you remotely monitor and troubleshoot
network machines from any site with corporate internet access. Download
this program from http://solution.samsungprinter.com.
AnyWeb Print
This tool helps you to screen-capture, preview, scrap and print the screen of
Windows Internet Explorer more easily, than when you use the ordinary
program. Click Start > All programs > Samsung Printers > your machine
name > AnyWeb Print to link the website where the tool is available for the
download. This tool is available only for Windows operating systems.
SetIP
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol. (See "IP setting
using SetIP Program (Windows)" on page 29, "IP setting using SetIP
Program (Macintosh)" on page 29 or "IP setting using SetIP Program
(Linux)" on page 30.)
TCP/IPv6 is not supported by this program.
USING A WIRED NETWORK
You must set up the network protocols on your machine to use it on your
network. This chapter will show you how this is easily accomplished.
You can use network after connecting network cable to a corresponding
port on your machine.
Printing network configuration report
You can print a Network Configuration Report from the machine's control
panel that will show the current machine's network settings. This will help
you to set up a network and troubleshooting problems.
To print the report:
In ready mode, press and hold the
You can find your machine's MAC address and IP address.
For example:
•
MAC Address : 00:15:99:41:A2:78
(cancel button) for about 5 seconds.
Advertisement
