Terminal Panel - NEC MultiSync M321 User Manual

Terminal Panel

A
AC IN Connector
Connects with the supplied power cord.
B
Main Power Switch
On/Off switch to turn main power ON/OFF.
C
AUDIO OUT
Audio signal output from DisplayPort and HDMI to an
external device (stereo receiver, amplifier, etc.).
NOTEN:

This connector is not a headphone terminal.
D
REMOTE
Use the optional sensor unit by connecting it to your monitor.


NOTEN: • Do not use this connector unless specified.

• When the optional sensor unit is connected, the
monitor's remote control sensor is disabled.
E
LAN Port IN (RJ-45)
Connect to LAN in order to manage and control the monitor
over the network. See page
F
DisplayPort IN
DisplayPort signals input.
52.
HDMI
LAN
AUDIO OUT
DisplayPort
REMOTE
G
HDMI IN (HDMI1 (ARC)/HDMI2)
HDMI signals input.

NOTEN:
• HDMI1 terminal also supports ARC (Audio
Return Channel) for audio output.

• ARC sends the monitor's sound to audio
equipment with an HDMI1 ARC connector.

• Use the included ARC-supported HDMI cable.
The audio equipment will output the monitor's
audio.

• The audio equipment can be controlled with the
included remote control.
H
USB Port
USB storage device reader for use with the Media Player.
Power supply for USB devices.
For the USB port information, please see
Port" on page 31.
I
RS-232C IN (D-Sub 9-pin)
Connect RS-232C input from external equipment, such
as a computer, in order to control RS-232C functions.
See page 51.
J
VGA(RGB) IN (mini D-Sub 15-pin)
Analog RGB signals input from a personal computer or from
other RGB equipment.
English−20
RS-232C IN
VGA(RGB) IN
USB
HDMI2
HDMI1 (ARC)
"Using the USB